Product Of The Week - Honda UMS425 bent shaft brushcutter
Honda UMS425 bent shaft brushcutter
Engine details
Four stroke engine
All Honda brush cutters have a four-stroke engine which runs on unleaded petrol so there is no need for the messy mixing of oil and petrol, making the machine more user friendly. Unlike most two stroke engines, this four-stroke engine has a separate oil sump so a top tip from our experts is to remember to check the oil levels of the machine after every use. The UMS425 is driven by a unique six-splined drive shaft in contrast to the traditional groove key design for added strength, with better torque and power delivery.
Anti-vibration
This model uses an advanced anti-vibration system so the clutch produces low vibration to the user. This protects the user from experiencing the full vibration of the machine, adding comfort, and reducing operator fatigue. This smooth operation is perfect for users who may experience arthritis or vibration white finger. This brushcutter will get the job done without tiring out your arm.
Replacing your strimmer cord
Replacing the trimmer cord in your Honda UMS425 is extremely simple. Simply press and hold the two tabs to release the cutting head, take out the spool, remove the remaining cord from the previous use and wind on the new cord. A Top tip from our experts: You do not have to feed the ends through anything, just click the cord in and you’re good to go.
Starting procedure
The Honda UMS425 along with the entire range of Honda brush cutters are equipped with an easy start engine which is renowned for starting the first time every time.
- To start from cold, lock your throttle on, push the red start/stop button, then put the choke in the high position.
- A top tip from our experts is to then press the priming valve ten times to bring a sufficient amount of the out of the tank.
- The next step is to pull the recoil starter cord vigorously. After the engine has ticked over for about ten seconds, return the choke to the low position.
- Your machine is now ready to tackle the tough jobs.
Maneuverability
These brush cutters feel extremely maneuverable. This model was designed to create maximum comfort for the user while also delivering power and reliability. It is delicately balanced and provides you with sensitive control when pruning or trimming.
The bent shaft of this brush cutter makes the machine easier to maneuverer around trees and other obstacles.
The curved tube shaft creates easy access to all of those hard-to-reach areas but is to be used for grass cutting purposes only.
The loop handle was ergonomically designed so that it's more comfortable to use over longer periods of time, eliminating strain on hands and wrists. with the comfort harness, tap-and-go nylon head.
The tap-and-go nylon head quickly renews the nylon line when the auto feed line is tapped on the ground. Its light, well-balanced proportions enable you to control the unit easily as you work. Reaching tricky spots is much easier.
Willie Murphy, Service technician at ISE Forest and Garden Equipment Kilkenny says,
“The Honda UMS425 bent shaft brushcutter is a surprisingly powerful machine because it is extremely lightweight. This machine offers convenience to any buyer as the four stroke engine means you can completely avoid the mess of mixing oil and petrol. For just €329 the Honda UMS425 will not disappoint.”
https://mower.ie/product/honda-ums425ele
Stay tuned for next weeks ‘Product of the week’ which will be chosen by our sales advisor Keith Ryan.
Follow our social media on Facebook, Instagram and Twitter for daily updates.
For business updates please see our LinkedIn.
Search purposes: Product Of The Week - Honda UMS425 bent shaft brush cutter , Honda , Honda UMS425 , bent shaft brush cutter , brush cutter , UMS425 , UMS 425
