Please note this model has been discontinued and is replaced by the STIHL FS461, please click here to view the new model.

Note: This machine requires a mixture of 2 stroke oil and petrol at a 50:1 ratio. A simple way to calculate this is 100ml of 2 stroke oil with 5 Litres of petrol

If you are unsure of which machine will best suit your needs please just get in touch through email or tel 056 77 21125.

Displacement: 45.6cc

Power output: 3hp

Weight: 8.5kg

Warranty: 2 Year

STIHL FS460 is the most advanced clearing saw ever, featuring the ‘M-Tronic’ fully electronic engine management system which adjusts ignition timing and fuel metering in all operating modes. With ErgoStart and simplified starting, the low emission 2-MIX engine and a 4 point anti-vibration system, the FS 460 C-EM is the ideal choice for anyone with large areas of tough overgrown grass to maintain.

Technical specifications

Standard equipment

• 

  STIHL 2-MIX-Engine

  2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
• 

  STIHL M-Tronic

  This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
• 

  STIHL ErgoStart (E)

  STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
• 

  ADVANCE universal harness, orange

  With a comfort carry ring for quickly attaching an removing the clearing saw.
• 

  STIHL 4-point anti-vibration system

  In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)
• 

  Multi-function control handle

  Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
• 

  Bike handle

  When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
• 

  Tool free handle adjustment

  The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.
• 

  Simplified starting system

  Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
• 

  Start flap lever (M-Tronic)

  With the M-Tronic, you do not have to worry about cold or warm start. With M-Tronic there is only one starting position on the start flap lever. The system detects cold or warm start automatically and electronically calculates the exact amount of fuel. You can start with fewer starting strokes and can apply full throttle immediately. If you press the throttle trigger the start rotary switch will automatically return to the operating position. (similar to illustration)
• 

  Manual fuel pump (Purger)

  A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
• 

  Compensator

  This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
• 

  Winter setting slide control

  It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)
• 

  Locking plug-in bolt

  Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)
• 

  Large fuel tank

  The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)
• 

  Air filter with long service life

  The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)
• 

  Goggles

  It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters