The Barnel B525 6.5" Straight Blade Avnvil Ratchet Pruner has an Ingenious ratcheting action for easy, assisted cutting. The Off-center center bolt provides for a bigger cut (B007). The B525 has Nylon fiberglass liner for a clean finish on every cut. Replacement parts available.
How to use a ratchet pruner / lopper:
1. Open pruner or lopper all the way.
2. Place pruner or lopper on the subject branch, as far into the jaw as possible.
3. Squeeze the handles together, advancing the blade through the branch with minimal effort.
4. Open the shear slightly until you hear a definite CLICK. Again STOP and do not open the blade any further.
5. Squeeze again, repeating steps 3 and 4 to completely finish the cut. Do not pull or rip fibers.
Once you feel increased handle resistance, STOP squeezing.
Technical specifications
- Thermoplastic Rubber
- Non Stick Coating
- High Carbon Sword Steel
- Cutting Diameter: 5/8" (16mm)
- Overall Length: 6 1/2" (16.5cm)
- Weight: 4.3oz (130g)
