Note: This machine requires a mixture of 2 stroke oil and petrol at a 50:1 ratio. A simple way to calculate this is 100ml of 2 stroke oil with 5 Litres of petrol
If you are unsure of which machine will best suit your needs please just get in touch through email or tel 056 77 21125.
Power output: 1.2hp
Warranty: 2 Year
The STIHL FS70 RC-E is an extremely light, robust, professional petrol brushcutter with loop handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.
STIHL 2-MIX-Engine2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL ErgoStart (E)STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Basic harnessFor use with loop handle machines.
Multi-function control handleEasy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Loop handle (R)The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
Simplified starting systemSimply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Manual fuel pump (Purger)A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
GogglesIt is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.
|Power output||0,9/1,2 kW/PS|
|Weight 1)||4,8 kg|
|Sound pressure level with plastic tool 2)||94 dB(A)|
|Sound power level 2)||108 dB(A)|
|Vibration level, left/right with plastic tool 3)||7,6/6 m/s²|
|Total length 4)||170 cm|
|Cutting tool||AutoCut C 25-2|